In the design of high-speed network equipment, the selection of the PHY chip has a direct impact on the system’s power consumption, signal integrity and deployment flexibility. Microchip’s VSC8514-11, a thoroughly market-proven four-port Gigabit Ethernet copper PHY, offers a low-power architecture, a flexible QSGMII interface and a comprehensive suite of power-saving technologies, making it an ideal choice for enterprise-class switches, broadband gateways, data centre access equipment and industrial networking products. Mingjiada Electronics currently has genuine VSC8514XMK-11 units in stock; please feel free to enquire at any time.
VSC8514 Product Overview
The VSC8514 is a low-power, four-port 10/100/1000BASE-T Gigabit Ethernet transceiver. It integrates four independent copper Ethernet ports onto a single chip and utilises Microchip’s advanced mixed-signal and DSP architecture to maintain stable link performance in complex electromagnetic environments and across a wide temperature range. The chip is housed in a 12mm × 12mm, 138-pin QFN package, enabling high-density port integration within a compact footprint, which helps to save PCB space.
The upstream MAC interface utilises QSGMII (Quad Serial Gigabit Media Independent Interface), which carries aggregated data from all four ports via a single SerDes serial bus. This significantly reduces the number of pins between the MAC and the PHY, simplifies high-speed PCB routing, and is compatible with the QSGMII v1.3 specification, facilitating integration with mainstream switch chips and processors.
VSC8514 Specifications
Number of ports: 4 × 10/100/1000BASE-T copper ports
Ethernet standards: 10BASE-T, 100BASE-TX, 1000BASE-T
MAC interface: QSGMII v1.3, SerDes
Core voltage: 1.0 V
I/O voltage: 2.5 V
Operating temperature: –40 °C to +125 °C (industrial grade)
Package: QFN-138 (12 × 12 mm)
Cable Diagnostics: VeriPHY™
Energy-saving Standards: IEEE 802.3az EEE, ActiPHY™, PerfectReach™
Auto-cable Sequencing: HP Auto-MDIX
Synchronous Ethernet: SyncE support (select models)
PoE Compatibility: IEEE 802.3af Powered Devices
VSC8514 Key Features
EcoEthernet™ 2.0 Energy-Saving Technology Suite
The VSC8514-11 integrates Microchip’s innovative EcoEthernet™ 2.0 green energy-saving technology, comprising three core mechanisms: IEEE 802.3az Energy Efficient Ethernet (EEE) automatically reduces power consumption when link utilisation is low; ActiPHY™, which automatically switches to a low-power state when a port is unconnected; and PerfectReach™, which dynamically adjusts output power based on the actual cable length, delivering particularly significant energy savings over short transmission distances. Furthermore, the chip supports adjustable LED brightness control, further reducing the overall power consumption of the device.
Low EMI Design and Integrated Termination
The VSC8514-11 utilises low electromagnetic interference voltage-mode line drivers and incorporates integrated line-side termination resistors. This effectively suppresses electromagnetic emissions whilst reducing the number of external components, thereby helping to simplify the EMC certification process.
VeriPHY™ Cable Diagnostics and Rapid Link Fault Indication
The chip incorporates VeriPHY™ cable diagnostics, supporting cable fault detection and localisation, which facilitates on-site maintenance and remote troubleshooting. HP Auto-MDIX supports forced or automatic cable sequence crossover, simplifying installation. Rapid link fault indication can identify link anomalies within 1 millisecond, far exceeding the 750-millisecond requirement specified by the IEEE 802.3 standard, and offers practical engineering value for high-availability network scenarios.
Synchronous Ethernet Support
Selected models in the VSC8514 series support Synchronous Ethernet (SyncE), providing a programmable clock recovery output that complies with the ITU-T G.8261 standard. This makes them suitable for carrier-grade transport applications with stringent clock synchronisation requirements, such as TDM backhaul and wireless base stations.
VSC8514 Typical Application Scenarios
Enterprise-class Ethernet switches: Four-port Gigabit density; QSGMII interfaces reduce pin load on the main control chip, making them suitable for multi-port access switch designs.
Broadband gateways and home gateways: Low-power characteristics, combined with the EcoEthernet technology suite, meet energy efficiency regulations and green product requirements.
Data centre access equipment: Rapid link fault indication and VeriPHY diagnostic capabilities enhance operational and maintenance efficiency.
Industrial automation networks: A wide operating temperature range of –40°C to +125°C, suitable for harsh industrial environments.
Telecom-grade transport equipment: SyncE support makes it suitable for synchronous Ethernet scenarios such as TDM backhaul and wireless base stations.
Mingjiada Electronics Supply Information
Shenzhen Mingjiada Electronics Co., Ltd. maintains a long-term stock of genuine Microchip VSC8514XMK-11 devices, ensuring 100% authentic factory-direct products with traceable sourcing, whilst offering competitive pricing and rapid delivery services. Mingjiada Electronics also supplies other models in the VSC8514 series, with a comprehensive range to meet the requirements of various design projects.
To request samples or a bulk quotation for the VSC8514, please contact the Mingjiada Electronics sales team.
Contact Details
Mobile: +86 13410018555
Email: sales@hkmjd.com
Website: https://www.integrated-ic.com/
Tags: VSC8514XMK-11, VSC8514XMK-1, VSC8514XMK, VSC8514XM, VSC8514X, VSC8514
پیام شما باید بین 20 تا 3000 کاراکتر باشد!
Persian
